Apr 192011
 

About 50% of the time when I ask a customer “What stock would you like this on?” the answer I get is “Whatever you think it will look best (or print best) on.” I always wonder if they imagine a paper storage room with papers that print well on one side and papers that don’t on the other. Sometimes, I think it would be a lot easier if we stocked only one or two kinds of paper. But we don’t.

In the often confusing world of digital printing, paper weights and types have managed to distinguish themselves as a confusing topic for most people. Part of the problem lies in paper’s greatest drawback; it is a tactile product. Talk about it all you want; write long, complicated descriptions that start to sound a little like how a wine taster describes a wine; give it a brightness number. In the end, people want to FEEL the paper. And yet, this is also paper’s greatest asset, the reason it will probably survive the rush to a digital world. Paper has texture. Paper has a glossy or a smooth or a rough surface. It has depth. It has warmth.

In general there are only a few “rules” about what to print on, and these are very pragmatic. Things going through the mail need to be a certain minimum weight. No big surprise here. I have never had anyone try to send a post card that was printed on a text weight. Yet. BRC’s (business reply cards) must be a certain minimum weight. But aside from these few considerations, paper choice is a matter of taste and design. We try to stock a broad enough range of paper to meet most of those considerations.

Many US paper mills are no more. A good deal of our paper is from Canadian mills, some is from overseas. By the time it’s re-cut, re-branded, re-packaged and re-sold, it’s not always clear who actually manufactured it. Paper can be the cause of huge headaches in the digital print business. Humidity, too much or too little, can cause paper to jam unexpectedly, double-sheet feed, or curl out of the press. We keep most of our paper in sealed packs until we’re ready to use it. (We used to keep all of our paper in sealed plastic bins… the technology has gotten better.) We are very reluctant to add a new paper to our inventory until we have performed extensive testing. Sometimes, a rep (or a customer) will bring us in a few sample sheets which seem to run fine. Then when we begin the larger project, we suddenly experience multiple problems as the device heats up, or we try to duplex, or in finishing.

Most paper has some kind of a grain. In traditional (ink on paper) printing, the grain is usually “long” which means it runs parallel to the direction of the movement through the press (or is parallel to the longest side of the cut sheet). This gives the paper extra strength to navigate the many turns and twists through the press. In general, in digital printing, we like for the grain to be short so the sheet is more flexible. Grain is much more important when you get to finishing.

There are a couple of ways to check the grain. The easiest is to look at the packaging. The direction of the grain is usually the second number you see. 8-1/2″x11″ paper is long grain. 11″x8-1/2″ paper is short grain. (We speak of 12×18 as a stock paper size, but the package says 18×12.) If the paper is loose, fold the sheet you have in half in both directions and feel the folded edge. Folds with the grain will be much smoother than folds against the grain. I know there are other ways; tearing the paper will reveal its grain, but I think this is a bit more difficult to discern.

Grain comes into play more when you are finishing; folding, scoring, etc. Folding across the grain leaves a ragged edge unless you score first. For some paper weights, you need to score anyway, but especially in the lighter weight texts, trying to keep the grain going in the right direction when you are step and repeating a file can be the subject of some serious mental calisthenics. Scores across the grain need to be different than scores with the grain.

Next: paper weights and surfaces.

Apr 162011
 

Back in the “old days” we had a fellow working here as a typesetter (when we still were typesetters), let’s call him Charlie. Charlie was pretty laid back. While we were all running around “doing the crazy dance” trying to meet a deadline, Charlie would just lean back in his swivel chair, put his hands behind his head and say “It’s all just ink on paper.” That was his answer for every problem.

So let’s just take a moment to talk about the pros and cons of this digital printing. It is quite a bit more than “ink on paper,” and quite a bit less.

There’s an old saying that “whatever they’re talking about, they’re talking about money.” And the difference between digital and traditional (that “ink on paper” thing) has a lot to do with the money. A traditional printer buys his press; he (or she) may take out a loan to do it so there’s a loan payment every month. A traditional printer can run a million copies a month through the press and other than the loan payment the only costs are the paper, the ink, the payroll and the overhead. Almost all digital presses have a meter, just like the meter on your electric power. Every piece of paper that goes through the press clicks that meter over one notch. At the end of the month (or some established billing period) a meter read is taken and you are billed for each and every sheet. Whether you use it or not. This is in addition to the pretty hefty lease payment. And of course, there’s the cost of the paper, the payroll and the overhead. So there’s no way that digital printing (as we know it) can ever really compete with traditional printing on volume work. Having said that, I’m sure there are some big plants somewhere that have developed enough of a volume to stay pretty competitive. But for most independent small shops, it’s the “short run” market we look for, in general. Once you start talking about thousands or tens of thousands, we’re probably going to refer you to a traditional printer. At a traditional printer, the cost of all the make-ready processes usually prices short runs out of the market.

On the other hand, there are a number of instances, other than short runs, where digital printing is the process of choice. For example, when you need something very fast. Traditional printing takes time. Time to set up the job, time to make the plates, time to do the stripping, time to set up the press, time to let the ink dry. None of these figure into the digital process. If your electronic file is ready to go, we can usually print you job in a day or two under normal turnaround. And if you’re really in a rush we can usually print it the same day (this will cost you a premium rush charge). Another example would be variable data printing.

Variable data printing allows you to change the content of each and every page you print, “on the fly.” The information can include text, images, page formats, nearly anything. It is usually linked to a flat data file that directs the content of the page based on the data in the spreadsheet. So you could create a coupon page that only featured coupons for products your customer has already purchased in the past. Send a personalized letter with specific information about each customer, all at the same speed and price as a regular print run (there is a small additional set-up fee, but the print price is the same). Variable data is simply not possible with traditional printing; you’d have to make a new plate for each page. Fugggeddaboudit!

On the dark side,  there is this problem with alignment. Printing presses have a mechanism that positions each page before the image goes on. It keeps everything pretty much in line. They are still imperfect things, but they are a lot more perfect than many digital presses. Most toner-based digital presses are really souped-up copy machines. As such, the paper travels along a belt and the image is applied to it. This results in a couple of problems. First of all, the image does not necessarily go down on the same place on each page. In fact, on some digital presses, the specs allow for a substantial difference across an entire run, maybe as much as 1/8″. Then there’s the skew. The heavier the paper and the larger the sheet, the more skew you are likely to see. Both of these are combined to cause some issues on two-sided pieces where the designer has decided to use a different color panel on each fold. Expecting all of these sides to line up perfectly for each and every sheet is probably a bit optimistic in the digital  print world. It might happen, but don’t be too surprised if it doesn’t.

And finally there’s the post-processing issues. Scoring is my favorite. Toner, unlike ink, sits right up on the surface of the sheet. Try to score that nice glossy sheet on an all-black surface and you are probably going to end up with the image “cracking” along that seam.

Of course, all of these issues can be designed around. Try to keep your folds on light or white areas. Allow for a little extra “slop” on two sided pieces so folds that are a millimeter or so off won’t be too noticeable. Avoid borders, especially on business cards. We print them about 20-up on 12×18 and the cards on the outside corners are going to have just enough torque to show that border is not quite even. It’s the nature of the beast.

Digital printing is a valuable tool. It’s not, in its current generation, the answer for all your printing. But it can be the best way to go in a lot of cases. It does put some restrictions on design, but it can make up for that in speed, price, and flexibility.

Login